DLink Extender Login

Reset D’Link range extender is a simple procedure that can assist restore factory settings or fix connection problems.

• Find the device’s reset button which is usually a little recessed button to get started.
• To push it you’ll need a pointed tool such as a paper clip or pin.
• Make sure the extender is turned on because it has to be in order to reset.
• Holding down the reset button for ten to fifteen seconds will cause the LED indicators to blink or change their behavior indicating that the reset has begun.
• Wait for the reset dlink extender after releasing the button.
• The device returns to its factory default settings throughout this process which might take a few minutes.
• The extender must be reconfigured to connect to your network after being reset.
• To access the configuration interface use D-Link’s setup program or a web browser.
• Join the default wireless network of the extender which is often called “D-Link-Extender” or something similar.
• To configure the extender using your router’s network credentials open a browser and enter the default IP address (often 192.168.0.50) into the address bar.
• Then follow the on-screen directions.
• Make sure you have your network information on hand because a reset removes any custom settings including passwords.
• See the user manual for the device or get help from our experts if you run into problems. 
• Your network can function smoothly and your extender’s performance can be maximized with routine maintenance and sporadic resets.

Visit our website to learn more about it. If you need further help you may utilize our live chat function.